Shale Tech Solutions SRL distribuidor exclusivo de FANN para la Argentina
The Cement Curing Autoclave simulates pressure and temperature conditions for curing cement samples in accordance with API test procedures. After a specified curing time, set cement cubes are removed for crush testing for determining compressive-strength development.
An Autoclave pressure vessel is inserted into an automatic temperature-controlled heating jacket and pressurized with a hand-operated hydraulic pump. An automatic bleed-off valve mounted atop the autoclave assembly prevents excessive pressure buildup within the curing vessel. This model cures two single-cube specimens at a time in the vessel. This Autoclave is equipped with a state-of-the-art digital programmable rate set-point temperature controller.
Ordering Information
Part No. 101497200 Cement Curing Autoclave 115 Volt, 16 Amps 50/60 Hz
Part No. 101533369 Cement Curing Autoclave 230 Volt, 8 Amps 50/60 Hz
Specifications
| Temperature | 400°F (204°C) |
| Pressure | 3,000 psig (20.7 MPa) |
| Volume | 40.6oz (1200ml) |
| Capacity | 2 Cubes Power |
| Requirements | 115/230 Volts, 16/8 amps, 50/60 Hz Power |
| Output | 1,800 Watts |