Shale Tech Solutions SRL distribuidor exclusivo de FANN para la Argentina
A high-quality, bench-type lab pH meter designed to measure the entire pH scale (0-14)
The Lab Model Digital pH/Ion Meterhas a milli-volt range of +/-1000mV and easily converts from 115- to 230-volts AC power by use of a conveniently mounted switch. The unit provides accuracy and readability of 0.01 pH.
The automatic temperature compensation (ATC) range on this instrument runs from 0° to 100° centigrade. The ATC probe (included with meter) plugs into the front panel of the meter and automatically adjusts the readout to measure temperature variations in the fluid. The analog recorder output may be continuously used in conjunction with a recorder to display and record the pH measurements.
Laboratory Bench-type pH Meter provides stable, accurate measurements in pH, mV and temperature. Built-in memory function stores up to 50 pH, mV or relative mV readings with corresponding temperature. This meter is so easy to use; you’ll be ready to take readings in minutes!
The Lab Model pH Meter features a large dual display that shows pH (or mV) and temperature readings, and a water-resistant membrane keypad. Slide-out instruction card (included) stores underneath the meter for quick reference. This pH meter is supported by a full selection of Fann calibration buffers, electrodes and accessories.
Features
- Large dual display shows pH or mV, plus temperature
- Three-point pH calibration with auto buffer recognition
- ISO 9001 CERTIFIED
- Selectable buffer sets
- Lab Model Digital pH/Ion Meter
- Combination pH Probe
- Soaker Bottle and Soaker Solution
- Automatic Temperature Compensation (ATC) Probe
- Switch from pH to mV readings with a button press
- Features 0.1 mV resolution for ORP measurements
- Selectable manual or automatic temperature compensation
- Built-in memory function
- Hold function, Ready indicator, and diagnostic error messages
- Fully diagrammed manual, plus slide-out instruction card
Ordering Information
Part No. 209994 Lab Model Digital pH/Ion Meter
| Specifications | |
| Power | 9 VDC, 500 mA; using AC adapter (included)choose from 110 VAC, 60 Hz or 220 VAC, 50 Hz models AC adapter is CSA and UL listed |
| Input impedance | >1012Ω |
| Temperature Compensation | Selectable manual or automatic from 0 to 100°C |
| Memory | Up to 50 sets |
| Recorder output | ±2000 mV (directly proportional to input) |
| Recorder output connector | Mini pin (subminiature phono plug) |
| Display | Dual display of measurement with temperature and mode annunciators |
| Error messages | Diagnose operator error, electrode error, and meter error Pull-out instruction card decodes message |
| Type | pH | mV | Temperature |
| Range | 0.00 to 14.00 pH | -1999 to +1999 mV | 0 to 100°C |
| Resolution | 0.01 pH | 0.1 mV from ±199.9 mV 1 mV beyond ±199.9 mV | 0.1°C |
| Accuracy | ±0.01 pH | ±0.2 mV from ±199.9 mV ±2 mV beyond ±199.9 mV | 0.3°C |
| Calibration | Up to 3 points (USA: 4.01; 7.00; 10.01 or NIST: 4.01, 6.86; 9.18); auto-buffer recognition |
Offset up to ±150 mV | Offset 0.1°C increments up to ±5°C |
Note: Images of products are provided for illustrative purposes only. The actual product you receive may vary from the image displayed on this web site.